flat cable emi suppression cores (2631164051) part number: 2631164051 31 split flat cable core explanation of part numbers: C?digits 1 & 2 = product class C digits 3 & 4 = material grade flat cable suppression core can accommodate multi- conductors flat cables, in widths from 12.7 mm (0.500?) up to 77 mm (3.0?). these flat cable cores are available in two ferrite material grades to reduce conducted emi from 1 mhz to hundreds of mhz. clip part number: 0199001401 , 0199016551? our ? expanded cable & suppressor kit? (part number 0199000005) contains a selection of these flat cable cores and clips. flat cable cores are available in selected sizes in the ?flex circuit & ribbon cable core kit? (part number 0199000038). assembly clips are available for most of the split flat cable cores. see section ?flat cable cores assembly clips?. weight: 60 (g) chart legend + test frequency ?for assembly clips see flat cable cores assembly clips typical impedance ( ) 1 mhz 11 5 mhz 34 10 mhz + 52 25 mhz + 105 100 mhz + 310 250 mhz 440 ?flat cable suppression cores, split or single cores, are controlled for impedances only. minimum impedance values are specified for the + marked frequencies. the minimum impedance is typically the listed impedance less 20%. centered, single turn impedance tests for the 31 and 43 material parts are performed on the 4193a vector impedance analyzer. dim mm mm tol nominal inch inch misc. a 76.2 1.50 3 _ b 65.3 1.30 2.57 _ c 28.6 0.80 1.125 _ d 6.35 0.25 0.25 _ e 0.85 0.20 0.033 _ cable information max diameter max dimension solid equivalent flat cable cores 0 0 64.00 x 1.30 _ -
centered, single turn impedance tests for the 31 and 43 material parts are performed on the 4193a vector impedance analyzer. all tests are made with the shortest practical wire length. fair- rite products corp.?? ? ??one commercial row, wallkill, new york 12589-0288 888-324-7748 ?? ? ?? 845-895-2055 ?? ? ?? fax: 845-895-2629 ?? ? ?? ferrites@fair- rite.com ?? ? ??www.fair- rite.com
|
